النتائج 1 إلى 6 من 6

الموضوع: شرح تنصيب enkompass علي سيرفر ويندوز

  1. #1
    عضو مستشار الصورة الرمزية اباي ولد الجيد
    تاريخ التسجيل
    Aug 2005
    الدولة
    الامارات العربية المتحدة
    العمر
    47
    المشاركات
    65,951
    معدل تقييم المستوى
    80

    افتراضي شرح تنصيب enkompass علي سيرفر ويندوز

    Configuring Windows Server® 2008 for Enkompass

    Ensure Your Server Has Been Assigned a Static IP

    Your server will need to have a static, rather than a dynamic, IP. This address must be public-facing and routable (NAT is not a supported configuration). In addition, the public-facing IP address must match the license. To assign your server a static IP:

    • Click the Start button.
    • Select Control Panel from the Start menu.
    • Double-click the Network and Sharing Center icon.
    • Click the Manage Network Connections link in the top right corner of the window.
    • Double-click the Local Area Connection icon.
    • Click the Properties button.
    • Select Internet Protocol Version 4 (TCP/IPv4) from the resulting menu.
    • Click the Properties button.
    • Select Use the Following IP Address.
    • Type the IP address you wish to use into the IP Address field.
    • Click OK.


    Assigning the server a static IP.Install Active Directory

    Next, you'll need to install Active Directory. Active Directory will function as the Domain Controller for your server.

    • Note: If you are using the Web Edition of Windows Server® 2008, you will need to install Active Directory on a separate server. Then, add the Web Edition server to the Active Directory domain.


    • Click the Start button.
    • Highlight Administrative Tools to access the Administrative Tools menu.
    • Select Server Manager in the Administrative Tools menu.
    • Navigate to the Roles menu and select Add Roles.
    • Click the Active Directory Domain Services checkbox.
    • Follow the prompts, then click Install.
    • Click Close.

    Promote Active Directory as the Domain Controller

    Now that Active Directory has been installed, you'll need to promote it as the Domain Controller. However, it is critical that you do not use the same name for the Active Directory domain and the domain hosted on the server. To get started:

    • Go to Start and click Run.
    • In the available text field type: dcpromo
    • Click the Next button.
    • Select Create a new domain in a new forest.
    • Enter the hostname in the available text field.
      • Note: Your hostname must be a Fully Qualified Domain Name (FQDN) — for example, host.example.com.
      • Note: Your domain name functional level must be Windows Server 2008 or higher.
    • Select the Windows Server 2008 option from the Forest functional level pull-down menu.
    • From the Additional Options for Active Directory Domain Controller screen, select the DNS Server checkbox.
    • Follow the remaining prompts to set up your desired database and log locations.
      • Active Directory will be set as the Domain Controller; this may take a few minutes.
    • Click Finish.
    • Click Restart Now.

    Backing up Active Directory

    The reseller structure and privileges are stored in the Active Directory Domain Controller and should be backed up regularly. The Windows Server Backup Utility will back up Active Directory, but it must be installed by the Server Manager before you can use it.
    Install IIS

    Next, you'll need to install the IIS web server. To install IIS:

    • Click the Start button.
    • Highlight Administrative Tools to access the Administrative Tools menu.
    • Select Server Manager in the Administrative Tools menu.
    • Navigate to the Roles menu and select Add Role.
    • On the 1 or more roles screen, select Web Server.
      • If necessary, click the Add Required Features button on the resulting pop-up window.
    • Follow the prompts to set up IIS.
    • Go to the Server Manager, select IIS, select Add Role Services, and check all of the boxes in the list except the FTP-related options. (Enkompass will install its own FTP services later.)
      • If necessary, click the Add Required Features button on the resulting pop-up window.
    • Click the Install button.

    More specifically, the server that will run the Enkompass services, and host the Reseller and Web Site Owner interfaces, must have IIS7 installed with the following features:

    • All Common HTTP Features
    • Application Development
      • ASP.Net
      • .Net Extensibility
      • ISAPI Filters
      • ISAPI Extensions
      • Server Side Includes
    • Health and Diagnostics
      • HTTP Logging
      • Request Monitor
    • Security
      • Basic Authentication
      • Windows Authentication
      • URL Authorization
      • Request Filtering
      • IP and Domain Restrictions
    • Performance
      • Static Content Compression
    • Management Tools
      • IIS Management Console
      • IIS Management Scripts and Tools
      • Management Service
      • ALL IIS 6 Management Compatibility (If using MailEnable)

    Create the Administrator User Account

    To install Enkompass, you should create a new account and add it to the Domain Administrators Group. Do not use the default Administratoraccount to install Enkompass. This will help avoid confusion with the local administrator account.
    To do this:

    • Click the Start button.
    • Select Run from the Start menu.
    • Enter the following text in the available field:
      • dsa.msc
    • Right-click the appropriate host name and select New and User from the resulting menus.
      • Note: Do not create an administrator user account called admin. Enkompass creates and uses the admin account name by default.
    • Fill out the appropriate information in the available fields and click Next.
      • Only the First name and User logon name fields are required.
    • Right-click the user you just created and select Properties, then Member of, then Add:.
    • Type the following in the available field:
      • DNSAdmins; Domain Admins; Schema Admins; Cryptographic Operators; Administrators
    • Now, log out and log back in as the user you just created.

    Install Services

    Now, you need to install the services that Enkompass will use, such as your mail and database servers. You can install these servers in any order.
    SmarterMail Server

    The install file for a special bundle version of SmarterMail 5.5.3 or greater is available on the Enkompass download site. SmarterTools has generously provided a Lite version of their SmarterMail 5 Standard Edition, with unlimited domains.

    • Join the computer on which you plan to install SmarterMail to the Active Directory Domain after installing Windows Server and before installing SmarterMail.
    • After you install Enkompass, SmarterMail will detect that Enkompass is installed, and change to the Lite version with unlimited domains.
      • The Lite version of SmarterMail does not allow POP connections.
    • This version of SmarterMail can be upgraded to the Professional or Enterprise Edition by purchasing a license from SmarterTools at their website.
      • You will not be able to use Windows Server 2008 Web Edition with the Professional or Enterprise editions of SmarterMail, because they both use IMAP or MAPI and the Web Edition is only licensed for POP.
    • SmarterMail comes with its own webmail client and the Apache web server. It does not need to have IIS installed.

    Note: You cannot install both MailEnable and SmarterMail on the same physical server.
    MailEnable Server

    If you choose to install MailEnable, follow these instructions:

    • After installing Windows Server and before installing MailEnable, locate the server you wish to use for mail and join it to the Active Directory Domain.
    • Obtain the install file for MailEnable from MailEnable's website.
    • Copy this to the server(s) that you want MailEnable to run on.
      • You can install MailEnable Standard on Windows Server 2008 Web Edition because it only uses POP.
      • You may also install MailEnable Pro or Enterprise in place of the Standard Edition. You will not be able to use Windows Server 2008 Web Edition with these editions, because they use IMAP, and Web Edition is only licensed for POP.
        • These editions of MailEnable come with a webmail client and need to have IIS installed on the mail server.

    Warning: Do not install a trail version of MailEnable, as you will not be able to remove it when the trial period is over. If you have installed a trial version of MailEnable and you wish to remove it after the trial period is over, you will need to reinstall your server.
    Note: You cannot install both MailEnable and SmarterMail on the same physical server.
    MySQL Server


    • Install MySQL 5.1 or later and start the service. You can download the installation files from the MySQL site.
      • Enkompass will interface with the 32- or 64-bit edition of MySQL.
    • There must be a root account created so that Enkompass can control MySQL.
      • Record the account name and password. You will need to enter this in the Manage Servers page the Reseller Interface.
      • Also, make sure the root user has an access host for the IP of the Enkompass server.

    Microsoft SQL Server®


    • Obtain any edition of Microsoft SQL Server 2005 or 2008 and install it.
    • You must create an Administrator account so that Enkompass can control SQL Server.
      • Record the account name and password. You will need to enter this in the Manage Servers page of the Reseller Interface later.

    Configuring Windows Server

  2. #2
    عضو مستشار الصورة الرمزية اباي ولد الجيد
    تاريخ التسجيل
    Aug 2005
    الدولة
    الامارات العربية المتحدة
    العمر
    47
    المشاركات
    65,951
    معدل تقييم المستوى
    80

    افتراضي Installing Enkompass

    Installing Enkompass

    Important: You need a license in order to install Enkompass. Use the cPanel Partner Search to locate a cPanel Partner that offers Enkompass licenses. Or, purchase directly from cPanel. You can apply for a 30-day test license at the cPanel Store.


    Before You Begin

    First, a couple of important notes:

    • Your Enkompass server and any servers you wish to manage using Enkompass must be installed on an x64-bit version of Windows Server® 2008 Web Edition, Standard, Data Center, or Enterprise.
    • You will need to install Windows Server, then install Active Directory before you install Enkompass.
    • Note: If you are using the Web Edition of Windows Server® 2008, you will need to install Active Directory on a separate server. Then, add the Web Edition server to the Active Directory domain.

    Turning off User Account Control

    Enkompass cannot complete the installation of its services unless User Account Control is turned off. You must do this for every server in the Enkompass domain.
    To turn off User Account Control:
    From your Windows Start menu, choose Control Panel, and select the icon for User Accounts.
    Select Turn User Account Control on or off.
    Uncheck the box marked Use User Account Control to help protect your computer, and click OK.
    A dialog box appears stating: You must restart your computer to apply these changes.
    Click Restart Now and wait for the server to restart.
    Services Installed by Enkompass

    Certain services, and the Administrator account, are installed by the Enkompass Installer, as detailed below. This section is included for your reference.

    • Admin account — Enkompass installs services on the server on which it runs, and on all the servers it must control. These services must run under an administrator account. Because the environment uses Active Directory, this account only needs to be created once. Normally, this account is named Admin, and it is a member of DNSAdmins, SchemaAdmins, DomainAdmins, Cryptographic Operators, and Administrators. You can find more information about creating this user in the Create a New Account section of our Installing Windows Serverdocumentation.
    • Enkompass WCF Service — This service provides the core functionality of Enkompass. It communicates with the Reseller and Web Site Owner Interfaces using Windows Communications Foundation. It is installed only on the Enkompass server.
    • Mail Enable Controller Service — A service is installed on the MailEnable servers to allow Enkompass to administer the mail accounts.
    • MySQL Controller Service — We provide an interface to communicate with the distributed MySQL Servers. This service is only installed on the Enkompass server.
    • Enkompass Certificate Service — A service is installed on all servers, allowing certificates to be installed and managed on all servers.
    • Enkompass Web Logging Service — This service will coordinate and consolidate reports from all of the web servers within the system.
    • Enkompass Service Monitoring Service — Enkompass includes a useful utility for monitoring services that run on your servers. This application reaches out to every machine within your system and ensures that certain services are up and running.
    • Enkompass Queuing Service — This service allows Enkompass to queue and coordinate tasks for all of the servers within your system.

    Firewalls

    Make sure that the following ports are open for all servers in the Active Directory Domain:
    PortService135Remote Procedure Call (RPC)139Netbios2097Windows Communication Foundation (WCF) — WSOI, PreAuth, MOI2098WCF's Server Administrator Interface, StepLogging, Server Administrator Interface Streaming, and ServiceMonitor9031WCF's Microsoft® Message Queuing9111MailEnable connector service's WCF connections9998SmarterMa il
    Make sure that the following ports are open for all web servers:
    PortService2084PostgreSQL9021Windows Communication Foundation's (WCF) WebLogService9099WCF's Certificate service
    You should also make sure that the following ports are open for the Enkompass server:
    PortService2082Website Owner Interface2083Website Owner Interface over SSL2084PostgreSQL2086Ser ver Administrator Interface2087Server Administrator Interface over SSL2089License2095Mail Owner Interface2096Mail Owner Interface over SSL
    Note: To successfully complete the Server Connection test in the Enkompass Server Manager feature, you will need to allow ICMP (file and printer sharing) for remote servers.
    Installing Enkompass

    1. Use the Administrator's account you set up after installing Windows Server to log into the server where Enkompass will be installed.

    • All the Enkompass services will run with the privileges of this account on all the servers in the Active Directory Domain.

    2. Set up a share to hold all the account and website data.

    • The share must be an actual drive on a SAN, NAS, or file server where Windows Disk Quota Manager Service can run.
      • You will need to use a UNC path such as \\208.77.188.166\e. We strongly recommend using a location that all of the servers in the Active Directory domain can quickly access and that it be a RAID drive.
    • Set up the share with the following permissions. To access permissions, right click on the share's icon and select Properties from the resulting menu. In the new window, select the Sharing tab and click the Advanced Sharing... button. In the new window, click the Permissionsbutton to access the share's permissions.


    Everyone — Allow read.
    3. Set up a shared folder that all the web servers can reach; this folder will be used for IIS configuration.

    • Set up the share with these permissions:


    Everyone — Allow read.
    4. Download the Enkompass Installation Set from httpupdate.cpanel.net/enkompass.
    5. Run the installer, read the End User License Agreements, and click Accept for each.
    6. Follow the on-screen instructions to complete the installation. Enkompass will install its prerequisites.

    The first screen of the Enkompass installer.
    The Enkompass Setup Wizard


    The Enkompass Setup Wizard will guide you through the installation.
    When the Welcome screen appears, click Next.
    You will see the Enkompass End User License Agreement. Click the checkbox next to I accept the terms in the License Agreement. Then, clickNext.

    Accept the terms of the EULA to proceed with installation.
    Here is a little help with the installer entries:
    Destination folder — The folder where Enkompass will be installed.

    The Destination Folder screen.
    Active Directory Domain — The name of your Active Directory Domain is displayed for your records.
    Enkompass account name — The installer will create an account with the correct privileges to install and manage Enkompass.
    Note: To avoid configuration conflicts, do not use "Admin" or "Administrator" as your Enkompass account name.
    Enkompass account password — Type a strong password twice and make sure you remember it.

    The Active Directory Domain appears when you enter Enkompass account information.
    Administrator contact email — The administrator's email address, to which system messages will be sent.
    >
    The Admin Contact Information screen.
    Main IP — The installer displays the main IP address of the server.

    The Main IP Address screen.
    Primary DNS Server — The installer displays the IP address of the Active Directory Server with the integrated DNS.

    The Primary DNS Server screen.
    Enable Disk Quotas

    • If you ever want to limit the amount of disk space used by accounts, click the checkbox next to Enable Quotas.
    • Uncheck the box if you are using a storage device that does not support Windows Disk Quotas.


    Enabling quotas on the server.
    Volume or UNC Share Path — Type the location of the shared folder you set up in step 2. This folder will store the websites and accounts, and your IIS Virtual Directories will point here.

    The Website Share Path screen.
    Directory for Enkompass Accounts — The main directory for the websites and accounts on the above Volume or UNC Share Path.

    The Website Data Folder screen.
    Destination directory for account backup — System backups are stored in folders on this drive so you can recover the accounts. This should be a different drive from the one where the accounts are stored.

    The Backup Location screen.
    Enkompass will set up IIS to use a shared configuration. Enter a UNC path that will be accessible to all of the IIS servers — Type the location of the shared folder you set up in step 3 above. This share will contain the configuration files that IIS and Enkompass use to make the users' websites run on the available IIS servers.

    The Setup IIS Shared Configuration screen.
    Enkompass will display the IIS encryption password. This password is used to encrypt data passed among servers in your Active Directory domain.

    • The encrypted password is auto-generated.
    • It will appear in the manifest displayed after Enkompass is finished installing. Be sure to save this manifest in a secure location, not on this server.


    The IIS Encryption Password screen.
    The installer should be ready to install Enkompass. The following screen will appear:

    The Ready to install Enkompass screen.
    Once the installation has completed, Enkompass will display the Completed Setup screen.

    The Completed Setup screen.
    The Enkompass installer will place a manifest that lists your sever's installation settings on the desktop. This file is named EnkompassConfig.txt.
    Warning: Be sure to move this file to a secure place, as it lists sensitive information about your server.




    http://docs.cpanel.net/twiki/bin/view/AllDocumentation/EnkompassHelp/InstallingEnkompass

  3. #3
    عضو مستشار الصورة الرمزية اباي ولد الجيد
    تاريخ التسجيل
    Aug 2005
    الدولة
    الامارات العربية المتحدة
    العمر
    47
    المشاركات
    65,951
    معدل تقييم المستوى
    80

    افتراضي

    Index of /enkompass/



    Index of /enkompass/

    NameLast ModifiedSizeTypeParent Directory/ - DirectoryEdge/2012-Oct-25 07:27:16- DirectoryRelease/2012-Apr-18 12:23:21- DirectoryStable/2012-Feb-15 07:20:37- DirectoryBranchManifest.xml2011-Aug-11 06:36:330.4Ktext/xmlEnkompassSetup-3.0.0.69.exe2012-Oct-11 10:42:26744.2Mapplicatio n/octet-stream

  4. #4
    عضو مستشار الصورة الرمزية اباي ولد الجيد
    تاريخ التسجيل
    Aug 2005
    الدولة
    الامارات العربية المتحدة
    العمر
    47
    المشاركات
    65,951
    معدل تقييم المستوى
    80

    افتراضي دورة احتراف Enkompass Technical Quickstart

    شرح تثبيت لوحة تحكم سي بانل علي سيرفر ويندوز 2008 من الصفر وختي الاحترف

    [YOUTUBE]7DgpnVS26BQ[/YOUTUBE]

    الجزء الثاني

    [YOUTUBE]MA3NNc9VfJg[/YOUTUBE]


    الجزء الثالث

    Enkompass Technical Quickstart (Part 3 of 5) - Installing SQL Server 2008






    [YOUTUBE]yFiC26KVgcc[/YOUTUBE]

    الجزء الرابع

    [YOUTUBE]rC4DiIoc5do[/YOUTUBE]

    الجزء الخامس

    [YOUTUBE]wVhx7w6JNMY[/YOUTUBE]

  5. #5
    عضو مستشار الصورة الرمزية اباي ولد الجيد
    تاريخ التسجيل
    Aug 2005
    الدولة
    الامارات العربية المتحدة
    العمر
    47
    المشاركات
    65,951
    معدل تقييم المستوى
    80

    افتراضي طريقة تنصيب واحتراف Using Enkompass

    طريقة تنصيب واحتراف Using Enkompass

    طريقة تنصيب واحتراف Using Enkompass

    [YOUTUBE]OZDHp12GQR4[/YOUTUBE]

  6. #6
    عضو مستشار الصورة الرمزية اباي ولد الجيد
    تاريخ التسجيل
    Aug 2005
    الدولة
    الامارات العربية المتحدة
    العمر
    47
    المشاركات
    65,951
    معدل تقييم المستوى
    80

    افتراضي 29 فيديو تشرح لوحة علي ويندوز سيرفر 2008

    29 فيديو تشرح لوحة علي ويندوز سيرفر 2008

    [YOUTUBE]Ay_mDYWIYH4[/YOUTUBE]

    29 فيديو تشرح لوحة علي ويندوز سيرفر 2008

معلومات الموضوع

الأعضاء الذين يشاهدون هذا الموضوع

الذين يشاهدون الموضوع الآن: 1 (0 من الأعضاء و 1 زائر)

المواضيع المتشابهه

  1. لوحة تحكم Enkompass by cPanel لسيرفرات ويندوز مجانا لمدة سنة
    بواسطة اباي ولد الجيد في المنتدى مشهد تعليم ادارة السيرفرات وحمايتها
    مشاركات: 0
    آخر مشاركة: 31-01-2014, 07:30 AM
  2. تثبيت ويندوز سيرفر 2000 و 2003 و ويندوز اكس بي
    بواسطة اباي ولد الجيد في المنتدى مشهد شرح البرامج و الدورات التدريبية
    مشاركات: 1
    آخر مشاركة: 30-10-2010, 07:30 AM
  3. شرح تنصيب DigiChat علي سيرفر لينكس
    بواسطة tsounamee في المنتدى مشهد شروح تطوير المواقع والمنتديات
    مشاركات: 0
    آخر مشاركة: 26-08-2010, 10:33 PM
  4. شرح تنصيب digichat علي سيرفر لينيكس
    بواسطة أسامة في المنتدى مشهد شروح تطوير المواقع والمنتديات
    مشاركات: 0
    آخر مشاركة: 27-06-2010, 03:28 AM
  5. شرح تنصيب الويندوز سيرفر 2008
    بواسطة عبد الله اسلم في المنتدى مشهد شرح البرامج و الدورات التدريبية
    مشاركات: 1
    آخر مشاركة: 29-02-2008, 06:34 PM

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
من نحن
شبكة المشهد الموريتاني
روابط
Enter your links here
شاركنا
Title
Enter your content here